Get webhook notifications whenever Network & Infrastructure creates an incident, updates an incident, resolves an incident or changes a component status.
Remaining action::
\"Module(s) 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120 still need to be upgraded\".
Install has failed. Return code 0x40930020 (Non-disruptive upgrade of a module failed).
Please identify the cause of the failure, and try 'install all' again.
Date: 2014-12-18 01:28:51 UTC We always have ports with err-disable. We have updated the n6 pair in hot swap.
Date: 2014-12-18 01:25:42 UTC Several ports on the fex113 (no luck...) passed to err-disable and we could not shut/no shut them,commands fit but they are not applied.
bhs2-11a-n6(config-if)# shut
Please check if command was successful using appropriate show commands
The only way to reset them : reload for the switches one by one.
There is no impact on servers that are already up (it will switch on the second switch of the pair).
Date: 2014-12-17 18:18:00 UTC We will update them on 6.2.N2.5.
Date: 2014-12-17 18:17:26 UTC bhs2-11b-n6 has rebooted too.